Item Includes:

Overview:

The 12X-NDI Broadcast and Conference Camera, in the color white, from PTZ Optics, allows you to output up to a 1080p60 signal at the same time as via HDMI, SDI, as well as NDI or IP outputs (NDI and IP share the same RJ45 port). The NDI protocol, NewTek's innovative IP technology, gives you low-latency access to audio as well as video devices anywhere on your network for various A/V applications. You will not be restricted to sources connected directly to one single system. The 12X-NDI comes with a NewTek NDI license, so you'll be set to go right out of the box. The camera also has a composite output that has the ability to be used on its own (without any of the other outputs at the same time) to deliver 576i/480i resolution. The 12X-NDI has a 3.5 - 42.3mm lens providing a 12x zoom range which happens to be ideal for smaller meeting rooms and classrooms. The NDI versions of the PTZ Optics 12x cameras are ideal for streaming applications, houses of worship, sports streaming, live productions and even events, and when cable runs might be an issue (when you'd rather run Ethernet cables instead of coax). The camera does well in low-light or dim conditions owing to a fast f/1.8 - 2.8 lens aperture and minimum illumination requirement of only 0.5 lux. On top of this, built-in wide dynamic range and 2D and 3D noise reduction further enhance the conferencing experience. The camera is completely open-source, so developers can customize everything as they prefer using simple HTML. The 12X-NDI can be powered over PoE or using the included power supply. It offers RS-232 and RS-485 serial control, an audio line-in for HDMI and NDI/IP streams, and 10 presets via the included IR remote control or 255 via serial or IP control.

Features:

• Simultaneous 1080p60 output via HDMI, SDI, and NDI/IP
• Low-latency NDI video
• Composite output (576i/480i)
• 12x zoom
• Minimum illumination requirement of only 0.5 lux, for better low-light performance
• Built-in wide dynamic range and 2D/3D noise reduction
• PoE support

Specifications:

Image Sensor 2.1 MP, 1/2.7" CMOS
Output NDI: NDI|HX (over IP interface)
IP Interface: 1 x RJ45
3G-SDI: 1 x BNC (75 Ohms)
HDMI: 1 x HDMI type A
Composite: 1 x 1/8"/ 3.5 mm
Audio Line In Analog Audio: 1 x 1/8"/ 3.5 mm (NDI/IP, HDMI)
Resolution NDI/IP/SDI/HDMI:
1080p: 60/50/30/25
1080i: 60/50
720p: 60/50/30/25
Composite:
576i: 30
480i: 30
Note: All the outputs can stream up to 1080p60 simultaneously except for composite. When you use composite, the other outputs turn off.
Lens 3.5 - 42.3mm, f/1.8 - 2.8
Zoom 12x optical
Field of View Horizontal: 6.9° (tele) to 72.5° (wide)
Vertical: 3.9° (tele) to 44.8° (wide)
Minimum Illumination 0.5 lux at f/1.8, AGC on
Shutter Speed 1/30 - 1/10000 sec
SNR ≥55 dB
Flip / Mirror Vertical
Working Environment Indoor
Pan ±170°
Tilt Up: 90°
Down: 30°
Presets 10 via IR (255 via serial or IP)
Communication RS-232: 1 x 8-pin mini DIN input, 1 x 8-pin mini DIN output
RS-485: 1 x 2-pin
PELCO-D/P
NDI
Compression H.264, H.265, and MJPEG streaming over RJ45 LAN port
Baud Rate 2400 / 4800 / 9600 bits
Input Voltage 12 VDC (10.8 - 13 VDC) or PoE 802.3af
Power Supply JEITA-type power adapter (12 VDC in) included
Power Consumption 12 W (max)
USB USB 2.0 (future manufacturer use only)
Dimensions 5.6 x 6.5 x 6.7" / 14 x 16 x 17 cm
5.6 x 7.8 x 6.7" / 14 x 20 x 17 cm (with tilt)
Weight 3 lb / 1.4 kg
Package Weight 5.5 lb
Box Dimensions (LxWxH) 10.5 x 9.3 x 9.1"