Powerex C9000PRO Charger with 4 AA Powerex PRO Rechargeable NiMH Batteries & Cleaning Cloth
Couldn't load pickup availability
Powerex C9000PRO Charger w 4 AA PRO Rechargeable NiMH Batteries & Cleaning Cloth
The Powerex MH-C9000PRO Professional Charger-Analyzer charges 1 to 4 AA and AAA NiMH/NiCD rechargeable batteries via 4 independent charging slots in about 1 hour. The charger is small sized, measuring at 4.25” x 4.25” x 2” (LWH) and has a large backlit LCD screen with an on and off option. There are ten selectable charge and discharge rates from 0.2A to 2.0A and 0.1A to 1.0A respectively.
Charging current is changeable from 0.2A to 2.0A in 0.1A increments.
Useful when battery needs to be recharged without determining the capacity of the battery. It should be used on batteries known to be in good condition and have been in continuous use.
Applies a 16-hour 0.1C charge (0.1 times the capacity of the battery), rest for one hour, followed by a 0.2C discharge, rest again, and finally a 16-hour 0.1C recharge again.
This process is also known as “Forming Charge.” Also recommended with batteries that cannot be rescued by the Refresh & Analyze mode.
The process follows the IEC standard for determining battery capacity.
Discharging current adjustable from 0.1A to 1.0A in 0.1A increments.
Useful for analyzing the amount of charge stored in the battery. Battery is not recharged at the end of the cycle.
REFRESH & ANALYZE MODE
First recharges the battery, rest for two hours, discharges, rest, then recharges again. Charging and discharging rates are programmable.
Reports the discharge capacity at the end of the cycle.
Useful when the battery capacity needs to be determined.
The Powerex PRO Rechargeable AA NiMH Batteries (1.2V, 2700mAh) - 4-Pack is a package of 4 AA nickel-metal hydride (NiMH) batteries with ultra high capacity of 2700mAh.
Item includes a cleaning cloth.